Archive for 1997

PS&C Approach To Power Problems

About PS&C

Power Systems & Controls is a world leader in power quality and power protection technology, building systems for mission critical applications world-wide. Clients include many of the world’s leading research and test laboratories, rail and sea mass transit, advanced manufacturing, and data centers.

The company has a state of the art production and test facility located in Richmond, VA allowing for easy access to Washington, DC and the east coast. Today the company supports the USG and DOD, Fortune 500, and many other international organizations on a wide range of applications. We don’t just solve power problems; we engineer power solutions.

PS&C At Mitsubishi Motor

                                                           

Mitsubishi Motor Manufacturing of America, Inc. represents one of the most technologically advanced auto manufacturing facilities in the world. It is designed to accommodate several car models intermixed on one assembly line. In 1985, when original construction began on the 2 million square foot facility, power protection was already part of the package. Because of the enormous power requirements of the facility, two independent utility sources were utilized. These were connected to an automatic transfer switch, which sensed when one utility service was bad and switched to the other service.

In November of 1987, (2) dozen PS&C Industrial Motor Generator  units were installed to bridge the gap during operation of the transfer switch and to provide total electrical isolation from voltage variations and electrical disturbances (such as sags, brownouts, surges, etc.) on the normal utility source. The main function of the M-G sets was to provide clean, constant power to the computers controlling over 600 automated robots used at the facility to perform monotonous, cumbersome, and less desirable tasks.

According to Mr. Tom Hutson of Mitsubishi Plant Engineering, “partial interruptions are costly; therefore, the Series IMG must stay up and provide a clean energy source.” When asked if he would purchase another Series IMG Mr. Hutson said, “Yes, the quality of the output is the best, and I like the complete isolation of the outside energy source”. The PS&C M-G is particularly well suited for this demanding application because of the nature of the other loads on the same service, i.e. welders, painters, conveyers, etc. which work together to create a hostile environment for sensitive computer equipment. The Series IMG takes the dirty power source and makes it clean – a perfect solution for any industrial operation that requires clean, dependable power for their critical operations”.

About PS&C

Power Systems & Controls is a world leader in power quality and power protection technology, building systems for mission critical applications world-wide. Clients include many of the world’s leading research and test laboratories, rail and sea mass transit, advanced manufacturing, and data centers.

The company has a state of the art production and test facility located in Richmond, VA allowing for easy access to Washington, DC and the east coast. Today the company supports the USG and DOD, Fortune 500, and many other international organizations on a wide range of applications. We don’t just solve power problems; we engineer power solutions.

PS&C Installed Worldwide

                                                                

Since its establishment in 1965, Power Systems & Controls has prided itself on the ruggedness and adaptability of our rotary UPS and Power Conditioning systems. Units bearing the PS&C name can be found all over the world operating in many different climates and under very diverse conditions. PS&C units are presently operating in the Philippines at Metro Bank, at Pilipino Telephone, and over a dozen Series XC RUPS will soon be shipped to Meralco. Firms such as Medtronics, Smith Kline, and Dupont Merck in Puerto Rico also trust PS&C to keep their facilities running smoothly.

When Motorola in Hong Kong needed reliable, dependable backup for its fabrication plant, they chose PS&C. Other customers who depend on PS&C’s proven reliability are China Steel, Shell Canada, CFB Borden, and Bradesco Bank in Brazil. Guardian Industries, one of the world’s largest producers of glass for the automotive and construction industries, has had PS&C Series XC systems in their plant in Venezuela since 1980.

Power Systems & Controls recently starting supplying UPS systems to AURA – The Association of Universities for Research in Astronomy. The undertaking, known as the Gemini Project, is an international partnership to build two 8-meter telescopes. One will be located on Mount Mauna Kea, Hawaii and one on Mount Cerro Pachon, Chile. The telescopes and auxiliary instrumentation will be international facilities open to the scientific communities of England, Canada, Argentina, Brazil, and the United States.

The Series MC systems provided by PS&C will be backing up the observatory for rotating the building, as well as, serving as backup for the orderly shutdown of the facilities’ computers, should a power outage occur. Both sites offer high degree of clear weather and excellent atmospheric stability. The Gemini telescopes are designed to use the best image quality allowed by the Earth’s atmosphere. They will undertake a broad range of astronomical research programs within the partner countries.

The northern Gemini Telescope site located on the summit of Mauna Kea is completely developed with phone, electric, and water systems in place. The Cerro Pachon site located in the foothills of the Chilean Andes and is at present a mostly undeveloped site located on land owned by AURA. As evidenced, PS&C machines have proven their ability commercially worldwide. Wherever or whatever the problem you have with your electrical system, you can count on Power Systems & Controls to provide the best solution for your power quality needs.

About PS&C

Power Systems & Controls is a world leader in power quality and power protection technology, building systems for mission critical applications world-wide. Clients include many of the world’s leading research and test laboratories, rail and sea mass transit, advanced manufacturing, and data centers.

The company has a state of the art production and test facility located in Richmond, VA allowing for easy access to Washington, DC and the east coast. Today the company supports the USG and DOD, Fortune 500, and many other international organizations on a wide range of applications. We don’t just solve power problems; we engineer power solutions.

New PS&C Cleveland Rep

                                                                           

B.A.R.K. Technologies, Inc. (BTI) is a Cleveland based manufacturer’s rep company founded in 1992. Its management team has over 30 years of sales, marketing, and distribution experience, and participates in every aspect of OEM sales from product development through production. BTI has a strong customer base in wide variety of markets, including process control, utilities, medical, government, and automotive. They also represent a number of synergistic lines, handling the following products:

BTI has two offices in Ohio and one in Michigan that combined cover Ohio, Michigan, Western Pennsylvania, Kentucky, and West Virginia. BTI is an industry leader because of its key industry relationships, technical experience, and competent support and service team handling both the OEM and distribution sales channels. They pride themselves on the longevity of their principals, customers, ad personnel. CTI is continually updating and expanding its services and knowledge to keep up with the rapidly growing electronics industry.

About PS&C

Power Systems & Controls is a world leader in power quality and power protection technology, building systems for mission critical applications world-wide. Clients include many of the world’s leading research and test laboratories, rail and sea mass transit, advanced manufacturing, and data centers.

The company has a state of the art production and test facility located in Richmond, VA allowing for easy access to Washington, DC and the east coast. Today the company supports the USG and DOD, Fortune 500, and many other international organizations on a wide range of applications. We don’t just solve power problems; we engineer power solutions.

PS&C Signs Florida Rep

                                        

PowerLogics, centrally located in Apollo Beach, was formed in 1991 by Wayne and Jennifer Aldrich to offer logical solutions to electrical power problems in the Florida area. In addition to PS&C’s Hybrid Rotary UPS and Power Conditioning systems, PowerLLogics also represents a diverse group of other companies enabling them to offer a wide range of solutions for electrical problems. With their recent move to a larger facility, PowerLogics is ready to handle the challenges of the ever changing power market.

About PS&C

Power Systems & Controls is a world leader in power quality and power protection technology, building systems for mission critical applications world-wide. Clients include many of the world’s leading research and test laboratories, rail and sea mass transit, advanced manufacturing, and data centers.

The company has a state of the art production and test facility located in Richmond, VA allowing for easy access to Washington, DC and the east coast. Today the company supports the USG and DOD, Fortune 500, and many other international organizations on a wide range of applications. We don’t just solve power problems; we engineer power solutions.

Medtronic Selects PS&C

                                                     

Medtronic is the world’s largest medical technology company, offering an unprecedented breadth and depth of innovative therapies to fulfill their goals of stopping pain, restoring health, and extending life. Medtronic specializes in medical therapies, which treats cardiac and vascular diseases, diabetes, and neurological and musculoskeletal conditions. 

Power Systems & Controls will be providing rotary uninterruptible power supplies in support of the critical manufacturing operations in Puerto Rico. Due to the sensitive nature of their operations, we are unable to provide any additional information at this time.

About PS&C

Power Systems & Controls is a world leader in power quality and power protection technology, building systems for mission critical applications world-wide. Clients include many of the world’s leading research and test laboratories, rail and sea mass transit, advanced manufacturing, and data centers.

The company has a state of the art production and test facility located in Richmond, VA allowing for easy access to Washington, DC and the east coast. Today the company supports the USG and DOD, Fortune 500, and many other international organizations on a wide range of applications. We don’t just solve power problems; we engineer power solutions.