PS&C Introduces AVR

 

For the last few years, Power Systems & Controls had dedicated substantial Research & Development time and funding to the development of the Series GSR, Government Standard Automatic Voltage Regulator. The Series GSR is an extended range automatic voltage regulator designed to meet the high standards of the United States Government. It was put into development to meet a growing need by our USG customers and clients. Especially those customers stationed overseas where constant voltage deviations cause havoc on high-tech equipment and electronics.

The Series GSR is the most economical Power Conditioning solution available, and provides voltage sensitive load equipment with conditioned power that has been filtered for noise and adjusted for voltage. On a 480V system a 240V swing on the input will show up as less than a 50V change at the load. The Series GSR uses solid-state switches to select between seven (7) possible taps on the triple shielded isolation transformer. This switching takes place in less than a cycle. The system also provides protection from transient voltage spikes. It also comes complete with a system Maintenance Bypass Switch. Furthermore, the AVR has an array of options available to customize it to fit your specific application.

About PS&C

Power Systems & Controls is a world leader in power quality and power protection technology, building systems for mission critical applications world-wide. Clients include many of the world’s leading research and test laboratories, rail and sea mass transit, advanced manufacturing, and data centers.

The company has a state of the art production and test facility located in Richmond, VA allowing for easy access to Washington, DC and the east coast. Today the company supports the USG and DOD, Fortune 500, and many other international organizations on a wide range of applications. We don’t just solve power problems; we engineer power solutions.

PS&C – Service & Maintenance Solutions

          

About PS&C

Power Systems & Controls is a world leader in power quality and power protection technology, building systems for mission critical applications world-wide. Clients include many of the world’s leading research and test laboratories, rail and sea mass transit, advanced manufacturing, and data centers.

The company has a state of the art production and test facility located in Richmond, VA allowing for easy access to Washington, DC and the east coast. Today the company supports the USG and DOD, Fortune 500, and many other international organizations on a wide range of applications. We don’t just solve power problems; we engineer power solutions.

PS&C Partners With Toshiba

                                                                        

Power Systems & Controls is proud to announce a partnership with Toshiba of Tokyo, Japan. Toshiba Corporation is a Japanese multinational engineering and electronics conglomerate. PS&C will begin offering Toshiba UPS systems, as well as, static frequency converters later next month. These solid-state systems will certainly diversify PS&C’s current product offerings and further support the rotary products already in place. PS&C understands that the needs of our customers change with time, and that as a company we must evolve in order to better position ourselves to support our customers and clients in the future. Representatives from Toshiba met with PS&C executives early last month to finalize the project.

PS&C Engineering personnel will be travelling for training this month, in order to learn about the equipment and receive certifications from Toshiba. Power Systems & Controls will be the only company in Virginia permitted to represent Toshiba in the area. PS&C is excited about this move as it will allow us to better transition into the solid-state topology. It will also provide important insight for PS&C as we begin to learn about solid-state technology, and how we can incorporate this new technology moving forward. We at Power Systems & Controls know that there is never just one solution for every application, and that we have to offer as many viable solutions as possible to best support our customers in bringing their projects to fruition. We look forward to this partnership and are excited for what the future holds.

About PS&C

Power Systems & Controls is a world leader in power quality and power protection technology, building systems for mission critical applications world-wide. Clients include many of the world’s leading research and test laboratories, rail and sea mass transit, advanced manufacturing, and data centers.

The company has a state of the art production and test facility located in Richmond, VA allowing for easy access to Washington, DC and the east coast. Today the company supports the USG and DOD, Fortune 500, and many other international organizations on a wide range of applications. We don’t just solve power problems; we engineer power solutions.

New Industrial Motor Generator

 

Power Systems & Controls is proud to announce the Series IMG, Industrial Motor Generator, which will be available immediately. The industrial M-G set is the ideal answer for Industrial or Commercial customers who are experiencing power quality issues but cannot afford/need a full UPS system for their facility. The Series IMG is a large, robust piece of equipment, which is designed to support a large single piece of machinery or a whole facility, dependent on the application.

The Series IMG is available in the standard horizontal configuration; however, it is also available in a vertical configurations as well. Systems are offered up to the MVA level for low or medium voltage applications. Also the M-G is available in 600V and other international voltages. The rugged M-G Set can also be designed to tolerate a 40% drop from nominal input voltage for 30 seconds without affecting the load. Engineering has been working hard on this the last few months to meet the deadline, and all of us are excited about its future potential in the market.

About PS&C

Power Systems & Controls is a world leader in power quality and power protection technology, building systems for mission critical applications world-wide. Clients include many of the world’s leading research and test laboratories, rail and sea mass transit, advanced manufacturing, and data centers.

The company has a state of the art production and test facility located in Richmond, VA allowing for easy access to Washington, DC and the east coast. Today the company supports the USG and DOD, Fortune 500, and many other international organizations on a wide range of applications. We don’t just solve power problems; we engineer power solutions.

Long Island Rail Road Selects PS&C

                                                                        

The Long Island Rail Road (LIRR) is a commuter system provider serving Long Island and New York. It is the second busiest commuter railroad in North America serving millions of passengers each year. Established in 1834 and having operated continuously since then, it is the oldest US railroad still operating under its original name and charter. There are 124 stations on the LIRR with more than 700 miles of track, and it is publicly owned by the Metropolitan Transportation Authority.

Power Systems & Controls was contacted by Long Island Rail Road to participate in a tender project for two Frequency Converter systems that they needed to support signaling railroad operations. There was numerous stages in the review process, and countless drawings from Engineering were required as PS&C continually worked with LIRR to design the perfect solution for their project.

LIRR selected PS&C because we offered a super product, great customer service, and our attention to detail from incorporating Engineering’s insight and support. We beat out numerous other competitors for the project. PS&C is already in production of the (2) large Rotary Frequency Converters, which should be ready to ship ahead of schedule. Power Systems & Controls is excited to help and support LIRR, and can’t wait to work with them again in the near future.

About PS&C

Power Systems & Controls is a world leader in power quality and power protection technology, building systems for mission critical applications world-wide. Clients include many of the world’s leading research and test laboratories, rail and sea mass transit, advanced manufacturing, and data centers.

The company has a state of the art production and test facility located in Richmond, VA allowing for easy access to Washington, DC and the east coast. Today the company supports the USG and DOD, Fortune 500, and many other international organizations on a wide range of applications. We don’t just solve power problems; we engineer power solutions.