Paris Air Show 2007

                                                     

Power Systems & Controls will be travelling to International Paris Air Show 2007 at Le Bourget Airport in Paris France from June 18 – June 24, 2007. The Paris Air Show claims to be the world’s oldest air show seeing as it was first established in 1909. The airshow is an important event in the international aerospace and defense industry calendar, providing an opportunity to demonstrate civilian and military aircraft to potential customers and investors. The Paris event starts with four professional days closed to the general public. It then opens to the public from Friday to Sunday. The event is held every two years at the same airfield that Charles Lindbergh landed after the first solo transatlantic flight.

Power Systems & Controls has a state of the art production and test facility located in Richmond, VA allowing for easy access to Washington, DC and the east coast. PS&C has the unique ability to support both static (solid-state) and rotary (motor generator) UPS, frequency converter, and power conditioning requirements as we are one of the few companies in the world that manufactures both types of technology. Power Systems & Controls is an employee owned company and has a long history of successfully supporting mission critical applications across the world. PS&C – The Power Is On!

About PS&C

Power Systems & Controls is a world leader in power quality and power protection technology, building systems for mission critical applications world-wide. Clients include many of the world’s leading research and test laboratories, rail and sea mass transit, advanced manufacturing, and data centers. The company was founded in 1965 by CAT. Today the company is headquartered in Richmond, VA and supports the USG and DOD, Fortune 500, and many other international organizations on a wide range of applications. We don’t just solve power problems; we engineer power solutions.

First Power Line Filters Ship

 

We are proud to announce the first shipment of PS&C’s Series PLF Power Line Filters. The Series PLF was designed to deliver clean isolated power into shielded spaces or areas that are not capable of housing tempest rated Motor Generator Sets. These filters range from 5 amps to 1200 amps in 2 to 5 wire versions; however, the 4 wire model is the most common. The Series PLF are manufactured with inductive inputs and capacitive inputs depending upon the customers primary loads down-stream of the Power Line Filter.

The newest models are rated for 100dB from 14K to 10G with a maximum of 1% voltage drop at full load. The Power Line Filters are delivered with lifting eyes and legs for the larger units to ease installation. The case is made from 14 gauge cold rolled steel with an isolation bulkhead that has a separate compartment for ease of clean side connections. The Series PLF can be mounted in any geometry and we are excited to offer this new product line to our dedicated USG customers and clients.

About PS&C

Power Systems & Controls is a world leader in power quality and power protection technology, building systems for mission critical applications world-wide. Clients include many of the world’s leading research and test laboratories, rail and sea mass transit, advanced manufacturing, and data centers. The company was founded in 1965 by CAT. Today the company is headquartered in Richmond, VA and supports the USG and DOD, Fortune 500, and many other international organizations on a wide range of applications. We don’t just solve power problems; we engineer power solutions.

Bechtel Bettis Selects PS&C

                                                                

Bechtel Bettis is a nuclear laboratory in the United States. They have selected PS&C’s Series IMG Industrial Motor-Generator with “Ride-Thru” technology to support their critical operations. The “Ride-Thru” integrates state-of-the-art controls, a single shaft motor-generator, and a mechanical flywheel into a power conditioning system that can deliver up to 5 seconds of ride-thru during an interruption of power. The typical induction-synchronous motor generator system delivers this ride-thru with a maximum frequency drop at full load of no more than 57 on a 60Hz system.

For sensitive applications where tighter tolerances are required, the Series SMG is available with Ride-Thru. Systems with this innovative new feature are sized and customized to meet a wide range of customer driven application criteria. Systems are available in size ranges up to 2000kVA for low voltage and medium voltage applications. Also please consult our factory for 600V and other international voltages available. We are proud to support Bechtel Bettis’ nuclear operations!

About PS&C

Power Systems & Controls is a world leader in power quality and power protection technology, building systems for mission critical applications world-wide. Clients include many of the world’s leading research and test laboratories, rail and sea mass transit, advanced manufacturing, and data centers. The company was founded in 1965 by CAT. Today the company is headquartered in Richmond, VA and supports the USG and DOD, Fortune 500, and many other international organizations on a wide range of applications. We don’t just solve power problems; we engineer power solutions.

International Agent in UAE

 

Heidan Industrial is a new international manufacturer’s representative, and is quickly becoming the leader in power quality solutions for the UAE. Heidan Industrial is located in Abu Dhabi, UAE and is led by its primary principle Mr. Khalid Heidan. Power Systems & Controls was introduced to Mr. Khalid in 2005 through our CEO Tom Delano. We are excited to welcome and work with Heidan Industrial.

Heidan Industrial will be supporting projects that require Hybrid Rotary Uninterruptible Power Supply (UPS) systems, Static UPS systems, Flywheel UPS systems, Power Conditioners, Rotary Frequency Converters, Static Frequency Converters, Power Factor Correction modules, Voltage Regulators, Lighting Inverters, Surge Protection Devices, and Isolation Transformers. They will be supporting both government and corporate requirements and have the full support of Power Systems & Controls’ Engineering and Field Service divisions. We look forward to working with Heidan Industrial and can’t wait to further expand our already extensive international footprint.

Power Systems & Controls has a state of the art production and test facility located in Richmond, VA allowing for easy access to Washington, DC and the east coast. PS&C has the unique ability to support both static (solid-state) and rotary (motor generator) UPS, frequency converter, and power conditioning requirements as we are one of the few companies in the world that manufactures both types of technology. Power Systems & Controls is an employee owned company and has a long history of successfully supporting mission critical applications across the world. PS&C – The Power Is On!

About PS&C

Power Systems & Controls is a world leader in power quality and power protection technology, building systems for mission critical applications world-wide. Clients include many of the world’s leading research and test laboratories, rail and sea mass transit, advanced manufacturing, and data centers. The company was founded in 1965 by CAT. Today the company is headquartered in Richmond, VA and supports the USG and DOD, Fortune 500, and many other international organizations on a wide range of applications. We don’t just solve power problems; we engineer power solutions.

Farnborough International Airshow 2006

                                                      

Power Systems & Controls will be travelling to Farnborough International Airshow 2006 at Farnborough Airport in Hampshire, United Kingdom from July 17 – July 23, 2006. It is one of the world’s most famous air shows and attracts crowds in excess of 250,000. The airshow is an important event in the international aerospace and defense industry calendar, providing an opportunity to demonstrate civilian and military aircraft to potential customers and investors. 

Power Systems & Controls has a state of the art production and test facility located in Richmond, VA allowing for easy access to Washington, DC and the east coast. PS&C has the unique ability to support both static (solid-state) and rotary (motor generator) UPS, frequency converter, and power conditioning requirements as we are one of the few companies in the world that manufactures both types of technology. Power Systems & Controls is an employee owned company and has a long history of successfully supporting mission critical applications across the world. PS&C – The Power Is On!

About PS&C

Power Systems & Controls is a world leader in power quality and power protection technology, building systems for mission critical applications world-wide. Clients include many of the world’s leading research and test laboratories, rail and sea mass transit, advanced manufacturing, and data centers. The company was founded in 1965 by CAT. Today the company is headquartered in Richmond, VA and supports the USG and DOD, Fortune 500, and many other international organizations on a wide range of applications. We don’t just solve power problems; we engineer power solutions.

PS&C Laser Communication Protection

 

The Series LCP is a Laser Communication Protection module developed by Power Systems & Controls. The Series LCP is utilized to protect communication between buildings and/or stations with not only surge protection, but also an “on-line” UPS system. This harsh environment unit has been designed in support of the “mission critical” USG or DOD customer.

PS&C’s Series LCP can operate in the most remote locations in the world where the power can move around the single phase 120V numerous times within a hour. As an option, the Series LCP takes an input of (220-240) voltage at 50Hz or 60Hz power and will deliver clean isolated 120V, single phase, 50 or 60Hz output. The standard output is achieved via 3 hospital grade duplex outlets and an isolated ground. The unit further protects the load by means of an input TVSS for the power and Ethernet/phone.

PS&C also equips the Series LCP with the capability of “Hot Start” directly from the battery in order to give the user a few minutes of power when no source power is available. Power Systems & Controls is excited to offer this new system to our USG and DOD customers & clients.

About PS&C

Power Systems & Controls is a world leader in power quality and power protection technology, building systems for mission critical applications world-wide. Clients include many of the world’s leading research and test laboratories, rail and sea mass transit, advanced manufacturing, and data centers. The company was founded in 1965 by CAT. Today the company is headquartered in Richmond, VA and supports the USG and DOD, Fortune 500, and many other international organizations on a wide range of applications. We don’t just solve power problems; we engineer power solutions.

PS&C Protects Busch Gardens

                                                   

Busch Gardens recently decided to purchase PS&C static Uninterruptible Power Supply (UPS) systems to support their amusement park operations. The Continuum UPS systems will be less than 100kVA, and will be used throughout the park. Busch Gardens was initially developed as a marketing vehicle for Anheuser-Busch and featured hospitality houses with samples of Anheuser-Busch products. They also included stables that housed many of the company’s Clydesdale horses, which have been associated with Anheuser-Busch since 1933.

Eventually, rides and attractions were added to the park and over time the park was developed into full theme park while still promoting Anheuser-Busch. Busch Entertainment Corporation, now called SeaWorld Parks & Entertainment, was created as a subsidiary of Anheuser-Busch Companies to run the various parks in 1959. Power Systems & Controls looks forward to supporting another Virginia corporation, and we can’t wait to visit the park this summer!

Power Systems & Controls has a state of the art production and test facility located in Richmond, VA allowing for easy access to Washington, DC and the east coast. PS&C has the unique ability to support both static (solid-state) and rotary (motor generator) UPS, frequency converter, and power conditioning requirements as we are one of the few companies in the world that manufactures both types of technology. Power Systems & Controls is an employee owned company and has a long history of successfully supporting mission critical applications across the world. PS&C – The Power Is On!

About PS&C

Power Systems & Controls is a world leader in power quality and power protection technology, building systems for mission critical applications world-wide. Clients include many of the world’s leading research and test laboratories, rail and sea mass transit, advanced manufacturing, and data centers. The company was founded in 1965 by CAT. Today the company is headquartered in Richmond, VA and supports the USG and DOD, Fortune 500, and many other international organizations on a wide range of applications. We don’t just solve power problems; we engineer power solutions.

PS&C – Don’t Be Left In The Dark

     

PS&C Continuum Static UPS

 

The Series Continuum is the latest Solid-State power quality product from Power Systems & Controls. The Series Continuum is a static (solid-state) Uninterruptible Power Supply designed to handle the most critical loads in the most severe environments. This is the culmination of a two year research and development effort by PS&C Engineering to offer the best IGBT/IGBT transformer-less static UPS (SUPS) in the industry. We at PS&C truly feel the Series Continuum will reinvent the way all Solid-State UPS systems of the future will be constructed.

The Series Continuum UPS incorporates the latest technology in solid-state PWM inverter and PWM rectifier/charger controls combined with the use of an all IGBT topology for most efficient double conversion process. This advancement in digital technology gives the PS&C Continuum a great advantage over other typical UPS systems. We have not used older technology (Diodes & SCR’s) on the front end in order to reduce cost. With an incredible input range reaching further, this UPS system will support equipment in the most extreme electrical conditions.

Power Systems & Controls has a state of the art production and test facility located in Richmond, VA allowing for easy access to Washington, DC and the east coast. PS&C has the unique ability to support both static (solid-state) and rotary (motor generator) UPS, frequency converter, and power conditioning requirements as we are one of the few companies in the world that manufactures both types of technology. Power Systems & Controls is an employee owned company and has a long history of successfully supporting mission critical applications across the world. PS&C – The Power Is On!

About PS&C

Power Systems & Controls is a world leader in power quality and power protection technology, building systems for mission critical applications world-wide. Clients include many of the world’s leading research and test laboratories, rail and sea mass transit, advanced manufacturing, and data centers. The company was founded in 1965 by CAT. Today the company is headquartered in Richmond, VA and supports the USG and DOD, Fortune 500, and many other international organizations on a wide range of applications. We don’t just solve power problems; we engineer power solutions.

PS&C Arrives in Singapore

                                              

Power Systems & Controls is proud to announce that we will be supporting Ecogreen Oleochemicals’ mission critical operations in Singapore. Founded in 1990, Ecogreen Oleochemicals is one of the leading producers of Natural Fatty Alcohols in the world. Ecogreen Oleochemicals has facilities in Indonesia, Singapore, Germany, and the United States.

Ecogreen Oleochemicals (Singapore) Pte Ltd. offers short chain fatty acids, glycerin, sugar and unsaturated fatty alcohols, primary fatty amines, specialty esters, and alcohol ethoxylates. Its products are used in detergents, shampoos, bath gels, personal care products, and antioxidants; cosmetics, textile and leather auxiliaries, and wetting agents; nutrition and diabetic products; and flotation agents, anti-caking agents, corrosion inhibitors, dispersants, emulsifiers, fungicides, and bactericides. It exports its products to the Asia Pacific, the United States, Latin America, and Europe.

Power Systems & Controls has a state of the art production and test facility located in Richmond, VA allowing for easy access to Washington, DC and the east coast. PS&C has the unique ability to support both static (solid-state) and rotary (motor generator) UPS, frequency converter, and power conditioning requirements as we are one of the few companies in the world that manufactures both types of technology. Power Systems & Controls is an employee owned company and has a long history of successfully supporting mission critical applications across the world. PS&C – The Power Is On!

About PS&C

Power Systems & Controls is a world leader in power quality and power protection technology, building systems for mission critical applications world-wide. Clients include many of the world’s leading research and test laboratories, rail and sea mass transit, advanced manufacturing, and data centers. The company was founded in 1965 by CAT. Today the company is headquartered in Richmond, VA and supports the USG and DOD, Fortune 500, and many other international organizations on a wide range of applications. We don’t just solve power problems; we engineer power solutions.