Power Systems & Controls, Inc.

English | Chinese | Arabic |
3 Phase Static UPS to 750 kVa | Single Phase Static UPS | Single Phase Laser Protection | Single Phase Lighting Inverter
Rotary UPS to 300 kVa | Rotary UPS from 300 to 2000 kVa | Batteryless UPS | Hybrid Rotary Parallel Ring Bus
Motor Generator Set | MG Set with Ride-Thru | Flywheel (DC source) | Isolation Filter | Dynamic Power Factor Correction
Automatic Voltage Regulator | Isolation Transformer | Isolation Motor Generator | Isolation Voltage Regulator
Static Frequency Converter | Rotary Frequency Converter | Dynamic Frequency Regulator | Ground Power Unit
Wireless Battery Monitor | Programmable Detector | Transient Voltage Surge Suppression

LOGO

Tag

Rotary UPS - Power Conditioning ReliabilitySeries XC - The Ultimate in Power Conditioning Reliability

XC Guideform Specification

Large Rotary Uninterruptible Power Supply Cut Sheet

System Description

The Series XC motor-generator set absorbs load harmonics and produces a pure sine-wave output, ideal for any critical load. By operating the rectifier/charger and inverter in series as the primary power path, the Series XC Hybrid™ UPS continuously tests its most critical components under actual operating conditions. There is no delay, no transients, no question when the utility source fails; transfer to battery and to alternate AC source is seamless. The reliability of those components to perform in a power outage is constantly being verified. By providing a physical air gap between the load and the utility source, the motor-generator set protects the critical load from high power transients, including lightning.

Lower Cost To Operate

The greater reliability of the Series XC Hybrid™ UPS significantly reduces the cost of ownership, and it virtually eliminates costly power disruptions. The Hybrid™ UPS is less expensive to operate because no air-conditioning is required

Design Features

  • Fully automated mode selection - full UPS/Rotating Filter/Load On Utility/System Off
  • Synchronized mode change without load disruption
  • Four-line alpha-numeric display - shows critical metering and status/fault indication including: voltage, current, PF, Frequency, power and efficiency
  • Silver-plated copper bus - reduces cabling, connections and hardware
  • N+1 redundancy
  • Battery operation on utility loss
  • Complete system shutdown and isolation in emergency
  • Input current limit and battery current limit for maintenance-free battery
  • PLC controlled system - reduced interconnection between modules, better noise immunity and more precise control
  • M-G output filter is more reliable than L.C. filter
  • M-G protects against lightning and eliminates EMI
  • No air-conditioning required
  • Direct battery-inverter connection for seamless transition to battery power
  • Clears faults in the load without bypass
  • Unique low-maintenance long-life design
  • Battery recovery in under two hours

Standard features and equipment

  • True on-line design
  • Motor-Generator set, which functions as a load isolation filter
  • Solid state rectifier/battery charger
  • Battery with disconnect switch
  • Redundant, self monitoring control logic
  • 20 year plus useful service life

Options

  • Split Input/Output voltage
  • Sound attenuation to 65dBA
  • Backup diesel generator with transfer switch
  • CRT based remote monitoring package
  • Parallel modules and "ring bus" configuration to 10,000kVA
  • Turnkey installation
  • Lease/Purchase contract
About Us | Site Map | Privacy Policy | Contact Us | ©2008 Power Systems & Controls, Inc.